Abloy Lock Rekeying Nationwide

Abloy Lock Rekeying: The Houston Owner’s Guide

Abloy lock rekeying in Houston typically runs $140-$280 depending on cylinder type and whether we’re working with a single deadbolt or a full multi-point entry set. Most Abloy rekey jobs we handle in Houston are completed same day, often within a couple hours of your call, because we keep the full range of Abloy key profiles and pinning kits on our trucks. We quote it flat before the truck rolls, and we put it in writing when the job is done.

Call (833) 695-3962

Most Houston homeowners discover they need an Abloy rekeyed after a move, a lost key, or a change in household staff. Sometimes it’s simpler: the key turns stiff, or you realize the previous owner handed out more copies than you knew about. Abloy’s disc-detainer system is built to last decades, but the pinning inside still needs resetting when keys fall into the wrong hands.

Which Abloy Models This Applies To

Abloy has manufactured several distinct cylinder lines over the years, and the rekeying approach differs for each. The Protec2 and Protec systems use rotating disc tumblers with a sidebar mechanism, which requires specialized pinning tools and key blanks that standard Kwikset or Schlage kits won’t touch. Older Abloy Classic and Exec cylinders use a different disc spacing and sidebar geometry. You can usually identify your series by the key bow shape: Protec2 keys have a distinctive rounded shoulder with “ABLOY PROTEC2” stamped near the bow, while Classic keys are flatter with a simpler profile.

We stock OEM Abloy key blanks and factory pinning kits for Protec2, Protec, and Exec lines. For discontinued Classic cylinders, we sometimes source quality aftermarket equivalents through our distributor in Dallas, though we always tell you upfront when we’re not using factory-original components. The cylinder housing itself rarely fails in Houston’s climate, but the disc springs can weaken after 15-20 years of heavy use, especially in coastal areas like Clear Lake where salt air accelerates surface corrosion on the keyway entrance.

If you’re unsure which Abloy cylinder is in your door, check for a small engraved code on the key shoulder or the face of the cylinder plug. Earl Hutchinson learned to identify these by sight at San Jacinto College three decades ago, and our technicians carry reference cards on every truck.

Signs Your Abloy Lock Rekeying Is Failing

• Key turns but bolt doesn’t retract. The tailpiece connecting the cylinder to the latch mechanism has slipped or sheared. On Abloy mortise sets common in Houston’s 1960s ranch homes, this often means the set screw worked loose after years of vibration from heavy door slams.
• Key inserts roughly or catches at certain angles. The disc tumblers inside are gummed with accumulated grit, or the keyway has worn from repeated use with a poorly cut duplicate. Houston’s pollen season doesn’t help; fine yellow dust works into mechanisms through March and April.
• Previous owner or tenant still has keys. This isn’t mechanical failure, but it’s the reason we rekey more Abloy locks than we replace them. You cannot know how many copies were made, and Abloy’s restricted keyway systems are only secure if you control the key blanks.
• Lock was rekeyed before, and now the new key sticks. An inexperienced technician used incorrect disc sizes or damaged a sidebar spring during the last rekey. We’ve fixed this exact mistake in Memorial and Bellaire more times than we can count.
• You’re upgrading to a master key system. Your Abloy Protec2 cylinder can be repinned for master keying without replacing the entire lock, but the math on disc combinations is exacting. One wrong disc and the master and change keys conflict.

Replacement Cost & What’s Included

These prices include disassembly, cleaning, new pins or discs as needed, reassembly with new keys, and testing. What drives the range: Protec2 cylinders take longer to pin correctly than Classic lines, and mortise cylinders in older Houston homes often require extra time to extract without damaging the door. We do not charge extra for “difficult access” or add trip fees inside the Beltway. Every rekey carries our 90-Day Done Right Promise - backed in writing, no arguing, no extra paperwork.

Seniors and veterans receive our standing 5% discount. If your total repair exceeds $250, ask about our $50 discount when you call.

DIY or Call Us?

There’s no dangerous spring tension in an Abloy cylinder rekey, but there’s plenty of opportunity to turn a simple job into an expensive one. What you can safely check: confirm the key number stamped on your key bow matches any paperwork you have, and verify whether your lock is under any existing key control registration that might restrict who can order blanks. What goes wrong with DIY: Abloy discs are measured in half-millimeter increments, and mixing a 0.5mm disc into a 1.0mm slot will let the wrong key operate the lock without you realizing it. The sidebar springs are tiny, easily launched across a kitchen table, and nearly impossible to source at a Houston hardware store.

We carry factory pinning kits and key blanks on every truck, and we register your new keys under your name if the system supports it. One call to (833) 695-3962 gets you a flat quote and a scheduled arrival time. We will be there when we say.

FAQs